R SERIES | |||
---|---|---|---|
*R001 | DIODE NETWORK | Seven diodes for adding inputs to gates and flip-flops. | $4.00 |
*R002 | DIODE NETWORK | Five 2-input diode networks; OR for ground AND for negative signals, when connected to diode-gate node points. | $5.00 |
*R107 | INVERTER | Seven one-input diode gates. One inverter also has node input. | $24.00 |
*R111 | EXPANDABLE NAND/NOR GATE | Three 2-input diode-transistor gates. NOR's for ground and NAND's for negative inputs. Node terminal provided for additional inputs. | $14.00 |
R113 | NAND/NOR GATE | Five 2-input diode transistor gates. NOR's for ground and NAND's for negative inputs. | $20.00 |
*R121 | NAND/NOR GATE | Four R111-type gates with loads internally connected and without nodes. | $17.00 |
*R122 | NOR/NAND GATE | Logical complement of R121, but somewhat slower One ma input and 18 ma outputs like R121. | $26.00 |
R123 | INPUT BUS GATE | Six two-input Ri 11-type gates without loads or nodes. Each gate shares one input with another. | $19.00 |
R131 | EXCLUSIVE OR | Four gates which perform exclusive OR function. | $35.00 |
*R141 | AND/NOR GATE | Seven 2-input gates. OR's NAND'ed together for ground inputs; AND's NOR'ed together for negative inputs. | $13.00 |
*R151 | OCTAL DECODER | One of eight outputs is grounded for each combination of states in three pairs of complementary inputs. | $33.00 |
R181 | DC CARRY CHAIN | Six cascaded AND gates for counting without carry delay. | $35.00 |
*R200 | FLIP-FLOP | Two-transistor flip-flop is set or cleared from its own outputs or direct set and clear inputs. Operates at up to 2 megacycles. | $9.50 |
*R201 | FLIP-FLOP | Flip-Flop with direct set and clear inputs and five diode capacitor-diode gates. Can be set or cleared from its outputs. | $22.00 |
*R202 | DUAL FLIP-FLOP | Two flip-flops; each with clear input and two diode-capacitor-diode input gates. Can be set or cleared from its outputs. | $25.00 |
*R203 | TRIPLE FLIP-FLOP | Three flip-flops, each with direct clear input and diode-capacitor-diode gate. Can be set or cleared from it soutputs. | $28.00 |
*R204 | QUADRUPLE FLIP-FLOP | Four flip-flops, each with direct clear and set inputs. Two flip-flops share each direct-clear input. Can be set or cleared from its outputs. | $28.00 |
*R205 | DUAL FLIP-FLOP | Two flip-flops with common clear and each having three diode-capacitor-diode gates. Can be set or cleared from its outputs. | $29.00 |
*R302 | DELAY | Two one-shot multivibrators triggered by capacitor-diode gates. Independent delays controlled internally or externally. | $44.00 |
R303 | INTEGRATING ONE SHOT | Zero recovery time multivibrator with complementary output buffers. Delays controlled externally or internally. | $45.00 |
*R401 | VARIABLE CLOCK | $45.00 | |
**R405 | CRYSTAL CLOCK | $100.00 | |
R601 | PULSE AMPLIFIER | Pulse amplifier and six capacitor-diode input gates. Driven by 40 to 100-nanosecond, positive-going pulses at up to 2 megacycles or 400-nanosecond pulses at up to 1 megacycle. | $25.00 |
R602 | PULSE AMPLIFIER | Two pulse amplifiers, each with two diode-capacitor-diode gates and one ungated input. Input frequency up to 2megacycles. | $22.00 |
* Normal Delivery off-the-shelf.
**2Mc only off-the-shelf delivery.
- (Page 393) -
R SERIES (Cont.) | |||
---|---|---|---|
*R603 | PULSE AMPLIFIER | Three pulse amplifiers, each with one diode-capacitor-diode gate and one ungated input. Input frequency up to 2 megacycles. | $28.00 |
*R650 | BUS DRIVER | Two inverting bus drivers, each with 2-input NOR or NAND diode-transistor gate. Node terminal provided for additional inputs | $23.00 |
W SERIES | |||
*W002 | CLAMPED LOAD | Fifteen 2-milliampere clamped loads. | $13.00 |
*W005 | CLAMPED LOAD | Fifteen 5-milliampere clamped loads. | $15.00 |
W018 | CONNECTOR MODULE | For 18-line, ribbon-cable connections. | $18.00 |
For each foot of cable or fraction: | $0.60 | ||
W018U | CONNECTOR MODULE | Without cable. | $9.00 |
W021-R | CONNECTOR MODULE | For 9 direct ribbon-cable connections: | $13.00 |
For each foot of cable, or fraction: | $0.60 | ||
W021-RU | CONNECTOR MODULE | Without cable. | $4.00 |
W021-C | CONNECTOR MODULE | For 9 direct co-axial connections: | $31.00 |
For each foot of cable, or fraction: | $1.50 | ||
W021-CU | CONNECTOR MODULE | Without cable. | $4.50 |
W022-R | CONNECTOR MODULE | For 9 terminated ribbon connections: | $13.50 |
For each foot of cable, or fraction: | $0.60 | ||
W022-RU | CONNECTOR MODULE | Without cable | $4.50 |
W022-C | CONNECTOR MODULE | For 9 terminated co-ax connections: | $33.00 |
For each foot of cable, or fraction: | $1.50 | ||
W022-CU | CONNECTOR MODULE | Without cable. | $6.50 |
W023 | CONNECTOR MODULE | For 18-line, ribbon-cable connections. | $13.00 |
For each foot of cable or fraction: | $0.60 | ||
W023U | CONNECTOR MODULE | Without cable. | $4.00 |
W028-R | CONNECTOR MODULE | For 9 jumperable ribbon connections: | $13.00 |
For each foot of cable, or fraction: | $0.60 | ||
W028-RU | MODULE CONNECTOR | Without cable. | $4.00 |
W028-C | MODULE CONNECTOR | For 9 jumperable co-ax connections: | $31.00 |
For each foot of cable, or fraction: | $1.50 | ||
W028-CU | CONNECTOR MODULE | Without cable. | $4.50 |
*W040 | SOLENOID DRIVER | Two high-current-drive amplifiers, each with a diode NOR or NAND gate. Node terminal provided for additional inputs. | $36.00 |
W042 | 10 AMP DRIVER | Four germanium transistor drivers which can provide up to 10 amps of DC drive. | $80.00 |
W043 | SOLENOID DRIVER | Two high-current-drive amplifiers, each with a diode NOR or NAND gate. Node terminal provided for additional inputs. | $35.00 |
*W050 | INDICATOR DRIVER | Seven amplifiers for miniature, incandescent indicators. | $13.00 |
W051 | 1OOma DRIVER | Seven higher-current circuits. | $22.00 |
W061 | RELAY DRIVER | Four quarter-amp, 55 volt, all-silicon drivers for loads returned to positive voltage. | $35.00 |
W080 | ISOLATED AC-DC SWITCH | Two floating switches controlled by light beams. Allows isolated control of line-operated devices. One-quarter amp at 125v AC or DC. | $60.00 |
* Normal Delivery off-the-shelf.
- (Page 394) -
W SERIES (Cont.) | |||
---|---|---|---|
W103 | DEVICE SELECTOR | For PDP-8. | $52.00 |
W108 | DECODING DRIVER | 300-ma, bipolar drive with 8 drivers, | $75.00 |
W500 | HIGH IMPEDANCE FOLLOWER | Seven fault-protected circuits, each comprising two cascaded emitter-follower amplifiers. Up to +- 30v in. | $25.00 |
*W501 | LEVEL CONVERTER AND SCHMITT TRIGGER | Produces standard pulses from contact closures or non-standard negative logic levels. Switching thresholds can be 0 to -2.5 volts. Contact-bounce integrator included. | $13.00 |
W502 | PHOTON COUPLED TRIGGER | Two isolated trigger circuits; each responds to light from tungsten filament falling on a photocell. Inputs 14v or 48v. | $38.00 |
*W510 | POSITIVE LEVEL CONVERTER | Three inverters with input thresholds which can be set at 0, +lv, or +2v. | $17.00 |
*W511 | NEGATIVE LEVEL CONVERTER | Two circuits for converting inputs between -50 volts and +25 volts to 3 volt levels. Switching point can be set to 0, -1, -2, or -3 volts. | $17.00 |
W512 | POSITIVE LEVEL CONVERTER | W and A Series Interface for Positive Logic Systems. | $25.00 |
W520 | COMPARATOR | An inexpensive comparator for A/D work, or a general purpose input level converter. Three circuits, each is a 4-transistor difference amplifier, DEC Standard levels at the output. | $43.00 |
W532 | DUAL AMPLIFIERS | Two AC-coupled differentiaI amplifiers. | $30.00 |
W533 | DUAL RECTIFYING SLICER | Two slicers that amplifies signals from a W532 and converts them to DEC signal. | $30.00 |
W590 | IBM N LINE TO DEC CONVERTER | Each of five inverting amplifiers provides inputs compatible with three types of IBM N lines. | $26.00 |
*W600 | NEGATIVE LEVEL AMPLIFIER | Three diode-transistor inverting amplifiers convert standard levels to outputs of ground and -1 to -15 volts. Node terminals provide for additional inputs. | $12.00 |
*W601 | POSITIVE IEVEL AMPLIFIER | Three diode-transistor inverting amplifiers convert standard levels to ground and 1 to 20-volt outputs. Additional gates added through node terminals. | $13.00 |
W602 | BIPOLAR LEVEL AMPLIFIER | Three inverting amplifiers for output levels at +6, +3, 0, -3, or -6 volts. | $40.00 |
W603 | POSITIVE LEVEL AMPLIFIER | Amplifier drives positive logic systems from FLIP CHIP systems. | $23.00 |
W607 | PULSE AMPLIFIER | Three pulse amplifiers. Input: 40-nanosecond (or wider) pulses at up to 2.5 megacycles. | $42.00 |
W640 | PULSE AMPLIFIER | Three standardizing amplifiers with transformer-coupled outputs of 400 nsec at up to 500 kc, or 1 1usec at up to 200 kc. | $42.00 |
W690 | DEC TO IBM N LINE CONVERTER | Each of four inverting drivers provides outputs compatible with three types of IBM N lines. | $36.00 |
W700 | SWITCH FILTER | Six switch filters reduce the effects of contact bounce. | $20.00 |
W705 | POWER SUPPLY (+3.6v) | Supplies upto 1 amp at +3.6 volts. | $15.00 |
W706 | TELETYPE RECEIVER | Integrated-circuit, serial-to-parallel Teletype code converter. | $150.00 |
W707 | TELETYPE TRANSMITTER | Integrated-circuit, parallel-to-serial Teletype code converter. | $150.00 |
W708 | TELETYPE INTERFACER | Provides special gating controls and clock synchronization for Teletype and data communications systems, when used with the W706 and W707. | $55.00 |
*Normal Delivery off-the-shelf,
- (Page 395) -
W SERIES (Cont.) | |||
---|---|---|---|
W800 | RELAY | Two normally open reed relays for up to 1/8 amp, 200 volts with contact protection provided. | $45.00 |
W802 | RELAY MULTIPLEXER | Eight double-pole, normally open relays, their drivers and a gating circuit. | $160.00 |
*W970 | BLANK BOARD | 36-pins | $4.00 |
*W971 | BLANK BOARD | Double-height W970, 72 pins | $8.00 |
*W972 | CLAD BOARD | 36-pins | $3.00 |
*W973 | CLAD BOARD | Double-height W972, 72 pins | $6.00 |
*W980 | MODULE EXTENDER | Allows access to circuits without breaking connections. | $14.00 |
W985 | ADAPTER | Puts a System Module in four FLIP CHIP slots. | $34.00 |
*W990 | BLANK BOARD | 18-Pins | $2.50 |
*W991 | BLANK BOARO | Double-height W990, 36-pins | $5.00 |
*W992 | CLAD BOARD | 18-pins | $2.00 |
*W993 | CLAD BOARD | Double-height W992, 36-pins | $4.00 |
*W994 | PERFORATED BOARD | $4.40 | |
*W995 | PERFORATED BOARD | A double-height W994. | $8.80 |
B SERIES | |||
*B104 | INVERTER | Four 10-megacycle inverters and three clamped load resistors. | $17.00 |
*B105 | INVERTER | Five 10-megacycle inverters and five clamped load resistors | $21.00 |
*B113 | NAND/NOR GATE | Four 2-input diode-transistor NOR or NAND gates with three clamped load resistors. | $23.00 |
B115 | NAND/NOR GATE | Three 3-input diode-transistor NOR or NAND gates and three clamped load resistors. | $21.00 |
B117 | NAND/NOR GATE | Two 6-input diode-transistor NOR or NAND gates. | $14.00 |
B123 | INVERTER | Three 10-ma clamped loads, 4 pairs transistor inverters. | $31.00 |
B124 | INVERTER | Three groups of three inverters, and three clamped load resistors. Logically complementary to B115. | $31.00 |
B130 | 3-BIT PARITY CIRCUIT | Two levels of gating at high speed, with complementary outputs. | $50.00 |
B155 | HALF BINARY-TO-OCTAL DECODER | One output is grounded for each of four input combinations, if each of three auxiliary inputs is also enabled, | $25.00 |
B171 | NAND/NOR GATE | One 12-input diode gate with two transistors. NOR and OR for ground signals; AND and NAND for negative signals. | $18.00 |
B200 | FLIP-FLOP | For building simple 10 mc registers at low cost. Short delay from pulse input to flip flop output. | $25.00 |
*B201 | FLIP-FLOP | General purpose flip-flop and nine input transistors. | $56.00 |
B204 | QUADRUPLE FLIP-FLOP | Four flip-flops with an inverter for common clear. Can be set or cleared from their outputs. | $29.00 |
*B301 | DELAY | One shot multivibrator with both pulse and level outputs. | $73.00 |
B310 | DELAY | Four delay lines, each with maximum delay of 50 nanoseconds in 12.5 nanosecond steps. | $66.00 |
B360 | DELAY (WITH PULSE AMPLIFIER) | Adjustable delay line (250 nanoseconds, maximum) and a pulse amplifier. | $84.00 |
*B401 | VARIABLE CLOCK | $57.00 | |
B405 | CRYSTAL CLOCK | $100.00 | |
B602 | PULSE AMPLIFIER | Two pulse ampljfiers for negative or positive pulses. | $36.00 |
B620 | CARRY PULSE AMPLIFIER | Two stages for long B201 counters. | $47.00 |
*Normal Delivery off-the-shelf.
- (Page 396) -
B SERIES (Cont.) | |||
---|---|---|---|
B681 | POWER INVERTER | Four inverters each equivalent to two paralleled B105 type inverters. Includes a 20 ma clamped load internally connected to each collector, and four separate 10 ma loads. | $25.00 |
B684 | BUS DRIVER | Two 40 ma drivers for direct or terminated connection. | $52.00 |
A SERIES | |||
A100 | MULTIPLIER SWITCHES | Solid-state analog switches. Transition time: less than one microsecond; offset; 100 to 300 microvolts. Controlled by standard levels and high frequency carrier. Transformer-coupled for isolation. | $100.00 |
A103 | $78.00 | ||
A121 | $65.00 | ||
A111 | MULTIPLEXER SWITCH | Low level relay multiplexer with guarded contact wiring. Two three-pole relays. | $93.00 |
! A200 | OPERATIONAL AMPLIFIER | 15 volt amplifier with a 2x10^6 open-loop voltage gain and a 15-megahertz unity gain. Differential inputs accept up to 10-volt common-mode signals. | $130.00 |
A201 | OPERATIONAL AMPLIFIER | High-speed, 10-volt amplifier with a 10,000 open-loop voltage gain and a 15-megacycle gain-bandwidth product Differential inputs accept up to 10-volt common-mode signals. | $180.00 |
A400 | SAMPLE AND HOLD AMPLIFIER | +- 10 volt sample and hold able to track a full scale excursion in 12 microseconds to 0.25% accuracy. | $330.00 |
*A502 | COMPARATOR | Difference amplifier for signals as small as one millivolt. Standard output drives R- or B-series modules. | $110.00 |
*A601 | DIGITAL-TO-ANALOG CONVERTER | Three-bit star networks with drivers and terminating resistor. | $60.00 |
*A604 | DIGITAL-TO-ANALOG CONVERTER | Two-bit network with drivers for more accuracy. | $62.00 |
A605 | DIGITAL-TO-ANALOG CONVERTER | Two-bit wirewound network with drivers for maximum accuracy. | $78.00. |
A606 | DIGITAL-TO-ANALOG CONVERTER | Two-bit network used with A604 to form one decade of BCD D to A conversion. | $62.00 |
A702 | REFERENCE SUPPLIES | Both -10 volt references. A702: 10-millivolt ripple, 30 millivolt load regulation. A704: 0.1-millivolt ripple, 0.1-millivolt load regulation | $58.00 |
*A704 | $184.00 | ||
A990 | AMPLIFIER BOARD | Predrilled etched board on which can be mounted one of several dozen types of operational amplifiers manufactured by three different companies. | $4.00 |
A992 | AMPLIFIER BOARD | Similar to A990, and also receives booster amplifiers. Accepts even more. different types, from many manufacturers. | $4.00 |
HARDWARE ACCESSORIES | |||
CAB-1 | CABINET | Includes End Panels | $700.00! |
Additional Cabinets | $500.00! | ||
CAB-2 | CABINET | Includes End Panels | $700.00! |
Additional Cabinets | $500.00! | ||
CAB-3 | CABINETS | Expander cabinet for PDP-8 | $650.00 |
CAB-6 | CABINET | Includes End Panels | $800.00! |
Additional Cabinets | $600.00! | ||
CAB-8A | CABINETS | Free standing with winged table. | $1,100.00 |
* Normal Delivery off-the-shelf.
! Non discountable
- (Page 397) -
HARDWARE ACCESSORIES (Cont.) | |||
---|---|---|---|
CAB-8B | CABINETS | Free standing with rectangular table. | $1,000.00 |
*H001 | BRACKETS | One pair brackets to mount a 1907 cover plate on a 19" mounting panel. Provides 3/4 inch standoff, cover plate flush with cabinet. | $8.00 |
*H002 | BRACKETS | One pair brackets to mount a 1907 cover plate on a 19 inch mounting panel. Provides 2 inch setback to leave room for lights, controls. | $8.00 |
H201 | CORE MEMORY | 4096 x 13 bit core memory (90 day guarantee) | $2,000.00! |
*H701 | POWER SUPPLIES | Small, chassis mounted supply electrically similar to 782A. | $116.00 |
*H701A | $136.00 | ||
H704 | POWER SUPPLY | Will drive six operational amplifier modules. All silicon, regulated, floating supply providing +- 15 volts at up to 400 ma on both outputs. | $200.00! |
*H800F | CONNECTOR BLOCKS | Unmounted 144 pin connectors for 8 FLIP CHIP modules. | $8.00 |
*H800W | $8.00 | ||
*H801F | PINS | Set of 18 spare pins to fit FLIP CHIP sockets. | $4.00 |
*H801W | $4.00 | ||
H802 | CONNECTOR BLOCK | For single FLIP CHIP modules. | $4.00 |
H803 | MODULE SOCKETS | Unmounted 288 pin connectors for 8-36 pin modules. | $13.00 |
H804 | MODULE SOCKETS | Unmounted 144 pin connector for 8-18 pin modules. | $9.00 |
H805 | CONNECTOR PINS | Set of 18 spare pins to fit H803 and H804 connectors. | $4.00 |
H810(24) | PISTOL GRIPHAND WIRE WRAPPING TOOL | For wrapping #24 solid wire on DEC Type H800-W Connector Pins. | $99.00! |
H810(30) | PISTOL GRIPHAND WIRE WRAPPING TOOL | For wrapping #30 solid wire on DEC Type H800-W Connector Pins. | $99.00 |
H810(24&30) | PISTOL GRIPHAND WIRE WRAPPING TOOL | For wrapping #24 and 30 wire on DEC type H800W H803 Connector Pins. | $150.00 |
H811(24) | HAND WRAPPING TOOL | For wrapping #24 wire on Connector Pins in service or repair applications. | $21.50! |
H811A(30) | HAND WRAPPING TOOL | For wrapping #30 wire on Connector Pins in service or repair applications. | $21.50! |
H812(24) | HAND UNWRAPPING TOOL | For removing #24 wire wrapped connections. | $10.50! |
H812A(30) | HAND UNWRAPPING TOOL | For removing #30 wire wrapped connections. | $10.50! |
H820 | GRIP CLIPS | Identical to slip-on connectors used on Type 913 patch-cords. Fit sizes 24-20 AWG wire. Shipped in packages of 1000. | $47.80! |
H825 | HAND CRIMPING TOOL | For crimping Type H820 Grip Clips. Insures a good electrical connection. | $146.70! |
H830 | STACK-ON RIVETING TOOL | $10.00 | |
*H900 | MOUNTING PANELS WITH POWER | For up to 32 modules. Power supplies electrically similar to 782, 782A | $180.00 |
H900A | $200.00 | ||
*H901 | MOUNTING PANEL | For patching up to 10 modules. | $82.50 |
*H902 | SWITCH AND INDICATOR PANEL | 5-in. panel for experimental use. Eight switches, eight indicator lamps with ground-enabled drivers, four rheostats for controlling clocks and delays. Complements H901 and 700D. Complete with indicator driver module. | $112.80 |
*H903 | ANALOG-DIGITAL PANEL | D-A converter and comparator (including module). | $143.00 |
H910 | 36-pin equivalent of H900. | $200.00 | |
H910A | 36-pin equivalent of H900A. |
* Normal Delivery off-the-shelf.
! Non-discountable
- (Page 398) -
HARDWARE ACCESSORIES (Cont.) | |||
---|---|---|---|
H911B | MOUNTING PANELS | Similar to the 1943 but uses H803 and H804 connectors. Following options available as indicated by the suffix letters: Marginal Check Switches (M) or terminal block (B), prewired power (P) or not. | $151.00 |
H911BP | $161.00 | ||
H911M | $172.00 | ||
H911MP | $182.00 | ||
*700D | POWER SUPPLY WITH DIAL | 5-in. panel for powering and pulsing experimental logic systems patched together on H901 panels. Contains a variable clock, three pulsers, with a telephone dial and three push-buttons for driving the pulsers. Designed especially for educational use. | $323.00 |
700DA | 50-cycle version of 700D. | $343.00 | |
*728 | POWER SUPPLIES | +10 v @ 0.7 amp, -15 v @ 1.8 amp, for 17" DEC cabinet plenum-door mounting. | $240.00 |
*728A | $260.00 | ||
*782 | POWER SUPPLIES | Rack-mounted power supplies with regulated +10 and -15 volt output at up to 0.4 and 3 amperes, respectively. Input: 782: 115 volts, 60 cycles. 782A: 112.5 to 235 volts, 50 cycles. | $128.00 |
*782A | $148.00 | ||
*783 | POWER SUPPLIES | Rack-mounted power supplies with electrical characteristics similar to 728 and 728A. | $240.00 |
*783A | $260.00 | ||
786 | VARIABLE POWER SUPPLIES | Standard rack mounting 0-24 volt variable supplies, 0-2.5 amp | $215.00 |
786A | $235.00 | ||
831 | POWER CONTROL | Specify 4, 10, 20, or 30 amp circuit-breaker: | $51.00 |
*900 | CONTROL PANEL | A front panel and chassis exactly duplicating 700D but without power. For multi-student installations on a Logic Laboratory. | $214.25 |
*911 | BANANA PATCH CORDS | Ten each 2, 4, 8,16, 32, or 64 inches. One box. | $9.00 |
*913 | WIRE WRAP PATCH CORDS | Hundred each 2, 4, 8, 16, 32 or 64 inches, One pkg. | $18.00 |
*914.7 | POWER JUMPERS | Ten each 7 inches long. One pkg. | $4.00 |
*914.19 | POWER JUMPERS | Ten each 19 inches long. One pkg. | $4.00 |
*932 | BUSSING STRIP | $.60 | |
*1907 | MOUNTING PANEL COVER | 51/4 by 19 inch cover plate to protect power and logic wiring and permit installation of lights and control switches on a 19 inch mounting panel. Use with one pair of brackets, H001 or H002 (order separately). | $9.00 |
*1943-F-B | MOUNTING PANEL | Houses 64 modules in a standard 19-inch rack. FolIowing options available as indicated by the suffix letters: Forked-pin solder (F) or wire-wrap (W) connectors; marginal check switches (M) or terminal block (B); prewired power (P) or not. | $111.00 |
*1943-W-B | $111.00 | ||
*1943-F-B-P | $121.00 | ||
*1943-W-B-P | $121.00 | ||
*1943-F-M | $132.00 | ||
*1943-W-M | $132.00 | ||
*1943-F-M-P | $142.00 | ||
*1943-W-M-P | $142.00 | ||
1945-19 | HOLD DOWN BAR | For 1943 mounting panel (19-inch). | $15.00 |
4906 | SINGLE INDICATOR | With amplifier. | $9.50 |
*4908 | SINGLE INDICATOR | Lamp and mounting hardware. | $3.00 |
4912 | ADAPTER | Puts a FLIP CHIP module in 2 system module slots. | $28.00 |
*4913 | MOUNTING RACK | For a power supply and four 5 1/2 inch panels. | $47.00 |
4917 | INDICATORS | 9 bit indicators with amplifiers. | $73.00 |
4918 | INDICATORS | 18 bit indicator with amplifiers. | $96.00 |
* Normal Delivery off-the-shelf.
- (Page 399) -
OCTAIDS and PANELAIDS (@) | |||
---|---|---|---|
D001A | D-A CONVERTER | 8 Bits | $377.25 |
D001B | D-A CONVERTER | 9 Bits | $439.25 |
D001C | D-A CONVERTER | 10 Bits | $439.25 |
D001D | D-A CONVERTER | 11 Bits | $501.25 |
D001E | D-A CONVERTER | 12 Bits | $519.25 |
D001F | D-A CONVERTER | 13 Bits | $597.25 |
D002 | BCD UP-COUNTER | Single Decade | $62.50 |
Quad Decade | $137.20 | ||
D004 | BI-DIRECTIONAL DECADE COUNTER | $123.40 | |
Decoding Option | $47.00 | ||
Conversion Option | $17.00 | ||
D005 | INPUT BUFFER INTERFACE | For PDP-8/S | $122.00 |
D006 | OUTPUT BUFFER INTERFACE | For PDP-8/S | $215.50 |
D007 | DUAL SHIFT REGISTER | 8 Bits | $249.00 |
Single Register | $133.00 | ||
D008 | DUAL UP-COUNTER | 8 Bits | $217.00 |
Single Up-Counter | $117.00 | ||
C001 | A-D CONVERTER | 10 Bits, 60 Hertz | $1,144.00 |
C001A | A-D CONVERTER | 10 Bits, 50 Hertz | $1,162.00 |
C002 | A-D CONVERTER | 10 Bits, without AC power. | $1,079.00 |
C003 | BCD REAL TIME CLOCK | 50/60 Hertz | $639.00 |
C005 | I/O BUS INTERFACE | For PDP-8/S | $12.00 |
C006 | I/O BUFFER REGISTER | For PDP-8 or PDP-8/S | $397.00 |
(@) See Printed Circuit Board Price List on Page 273.
All shipments are FOB. Maynard, Massachusetts,
and prices do not include state or local taxes.
Prices and specifications are subject to change without
notice.
QUANTITY DISCOUNTS
$5,000 -- 3%; $10,000 -- 5%; $20,000 -- 10%; $40,000 -- 15%;
$70,000 -- 18%; $100,000 -- 20%; $250,000 -- 22%; $500,000 --
25%
Discounts apply to any combination of FLIP CHIP, Cabinets are not
discountable.
- (Page 400) -